Filter
Top Products
45D-Link DAP-3410 User Manual
Section 3 - Conguration
Mode:
Destination
Net/Mask:
Via:
Gateway:
Interface:
Protocol:
Select whether the route being oered is either
Disabled or Enabled.
Enter either the destination network, or the
subnet mask that will be used in the static
route.
Select whether the static route will be controlled
by an existing gateway, or if the interface on
the AP should route the trac.
This option becomes available if Gateway is
selected. Enter the gateway IP address.
This option becomes available if Interface is
selected. Enter the interface on the AP that will
be used with the static route.
Select the checkmark for the routing protocol
that will be used to advertise this static route
to other routers on the network.
This page will allow you to dene specic routes that
will be broadcasted by the AP and made available to
the clients that connect to it.