Filter
Top Products
48D-Link DAP-3410 User Manual
Section 3 - Conguration
SNMP v3:
SNMP ro user:
SNMP ro
password:
SNMP rw user:
SNMP rw
password:
SNMP Trap:
Community:
IP 1 to 4:
Check the box to enable the SNMP v3 functions.
This option is disabled by default.
Enter the username for read only SNMP access.
Enter the password for read only SNMP access.
Enter the username for read/write SNMP
access.
Enter the password for read/write SNMP access.
Check the box to enable the sending of Trap
Status messages.
Set a community string required by the remote
host computer that will receive trap messages
or notices send by the system.
Enter the IP addresses of the remote hosts to
receive trap messages.