Filter
Top Products
28D-Link DAP-3410 User Manual
Section 3 - Conguration
Multi-SSID
The device supports up to four multiple Service Set Identiers.
In the Basic > Wireless section, you can set the Primary SSID.
The SSID’s factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to establish
a new wireless network.
Service Set Identifier (SSID) is the name
designated for a specic wireless local area
network (WLAN).
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
If this option is enabled, the connected clients
will not be able to view or access each other.
This option allows for load balancing on the
AP. It sets a limit on the number of connections
that can be used across all of the broadcasted
SSIDs.
Network
Name(SSID):
SSID Visibility:
Client Isolation:
Connection
Limit:
User Limit:
Authentication:
If Connection Limit is enabled, this option will allow you to input the maximum number of connected clients.
The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x.
For a detailed description of the Open System parameters, please go to page 19.
For a detailed description of the WPA-Personal parameters, please go to page 20.
For a detailed description of the WPA-Enterprise parameters, please go to page 21.
For a detailed description of the 802.1x parameters, please go to page 22.