Filter
Top Products
DVA-G3340S User Manual Page 18 of 94 V1.00 AU
you will not be able to use the features configured in the Firewall and Filters
menus located in the Advanced tab. See the next chapter for more details on
these menus.
10. Typically the global IP settings (i.e. IP address for the WAN interface) for a
PPPoA or PPPoA connection will use Dynamic IP assignment from the ISP.
Some accounts may be assigned a specific global IP address. If you have been
give an IP address for you PPPoE/PPPoA connection, select the Static IP option
from the IP Control pull-down menu. This menu can be used to configure the
WAN port as an Unnumbered IP interface. (See table below for Unnumbered IP)
11. Most users will not need to change ATM settings. If this is the first time you
are setting up the ADSL connection it is recommended that you leave the
Service Category settings at the default values until you have established the
connection. See the table on page 29 for a description of the parameters
available for ATM traffic shaping.
12. When you are satisfied that all the WAN settings are configured correctly,
click on the Apply button.
13. The new settings must be saved and the Router must be restarted for the
settings to take effect. To Save & Reboot the Router, click on the Tools
directory tab and then click the System menu button. In the System menu,
click the Save & Reboot button under Save Settings and Reboot the
System. The Router will save the new settings and restart. Upon restarting the
Router will automatically establish the WAN connection.
Additional settings for PPPoE/PPPoA connections:
PPPoE/PPPoA Parameters Description
User Name
For PPP connections, a User Name and Password are
used to identify and verify your account to the ISP.
Enter the User Name for your ADSL service account.
User names and passwords are case-sensitive, so
enter this information exactly as given to you by
your ISP.
Password
Together with the User Name, this is used to verify
your account to the ISP. Enter the Password exactly
as given to you by your ISP.
Connection Type
This specifies the protocol (PPPoE or PPPoA) and the
encapsulation method (LLC or VC-MUX) used for
your connection. The options available are PPPoE
LLC, PPPoA LLC or PPPoA VC-MUX.