Filter
Top Products
DVA-G3340S User Manual Page 36 of 94 V1.00 AU
Router must be restarted for the settings to go into effect. To save the new settings
and restart the Router, click on the Tools directory tab and then click the System
menu button. Click the Save & Reboot button under Save Settings and Reboot
the System. The Router will save the new DHCP settings and restart.
Use the Router for DHCP
To use the built-in DHCP server, click to select the DHCP Server option if it is not
already selected. The IP Address Pool settings can be adjusted. The Starting IP
Address is the lowest available IP address (default = 10.1.1.2). If you change the IP
address of the Router this will change automatically to be 1 more that the IP address
of the Router. The Ending IP Address is the highest IP address number in the pool.
Type in the Lease Time in the entry field provided. This is the amount of time in
seconds that a workstation is allowed to reserve an IP address in the pool if the
workstation is disconnected from the network or powered off.