Filter
Top Products
DVA-G3340S User Manual Page 60 of 94 V1.00 AU
Use Static Routing to
specify a route used
for data traffic within
your Ethernet LAN or
to route data on the
WAN. This is used to
specify that all packets
destined for a
particular network or
subnet use a
predetermined
gateway.
Routing
Advanced > Routing
Routing Menu
To add a static route to a specific destination IP on the local network, enter a
Destination IP address, Netmask, then click the Gateway radio button and type in
the Gateway’s IP address. Click Apply to enter the new static route in the table
below. The route becomes active immediately upon creation.
To add a static route to a specific destination IP on the WAN, click the Connection