Filter
Top Products
DVA-G3340S User Manual Page 25 of 94 V1.00 AU
method used for your ADSL service. The available options are 1483 Bridged
IP LLC and 1483 Bridged IP VC-Mux. If have not been provided specific
information for the Connection Type setting, leave the default setting.
4. Most users will not need to change ATM settings. If this is the first time you
are setting up the ADSL connection it is recommended that you leave the
Service Category settings at the default values until you have established
the connection. See the table on page 29 for a description of the parameters
available for ATM traffic shaping.
5. When you are satisfied that all the WAN settings are configured correctly,
click on the Apply button.
6. The new settings must be saved and the Router must be restarted for the
settings to go into effect. To Save & Reboot the Router, click on the Tools
directory tab and then click the System menu button. In the System menu,
click the Save & Reboot button under Save Settings and Reboot the
System. The Router will save the new settings and restart. Upon restarting
the Router will automatically establish the WAN connection.