Filter
Top Products
DVA-G3340S User Manual Page 23 of 94 V1.00 AU
cloned MAC address with the factory default setting,
type in all zeros - 0:0:0:0:0:0 - and click the Clone
MAC Address button.
MTU
The Maximum Transmission Unit size may be
changed if you want to optimize efficiency for
uploading data through the WAN interface. The
default setting (1400 bytes) should be suitable for
most users. Some user may want to adjust the
setting to optimize performance for wireless traffic or
when low latency is desired (such as with Internet
gaming). It is highly recommended that the user
research how adjusting the MTU may affect network
traffic for better or worse.
NAT
Network Address Translation may be enabled or
disabled with the pull-down menu. Keep in mind that
disabling NAT allows only a single computer to be
used for Internet access through the Router. NAT is
enabled for the Router on all connections (i.e. Pvc0 –
Pvc7) if your Router is set up for multiple virtual
connections.
Firewall
Use this to universally enable or disable the Firewall
and Filter features available in the Router. If you
disable this you will not be able to configure settings
in the Firewall or Filters menus in the Advanced
directory.