Filter
Top Products
DVA-G3340S User Manual Page 31 of 94 V1.00 AU
The ATM settings in the
WAN configuration menus
for the different
connection types can be
used to adjust QoS
parameters for ADSL
clients. This may not be
available to all ADSL
accounts. Ask your ISP if
ATM Traffic Shaping is
available for your
account.
ATM VC Settings
Home > WAN > ATM VC Settings
ATM VC Settings in WAN connection menu
The table below describes the ATM VC settings used to configure a connection for an
ADSL account.
ATM VC Parameters Description
PVC
The Router supports using up to eight multiple
virtual connections. This menu allows the user to
configure WAN settings for all the available
connections (see instructions below on how to set
up Multiple Virtual Connections). Use the PVC menu
to select the connection (Pvc0 to Pvc7) you want to
configure. Since most users will use only a single
connection, the default setting Pvc0 can be used for
any changes made to the WAN settings.
VPI
The Virtual Path Identifier is used with the VCI to
define a dedicated circuit on the ATM network
portion of the connection to the Internet and WAN.
Most users will not need to change this setting.
VCI
The Virtual Channel Identifier is used with the VPI
to define a dedicated circuit on the ATM network
portion of the connection to the Internet and WAN.
Most users will not need to change this setting.
Virtual Circuit
As with the PVC setting, this is mainly for use by
clients who are configuring the Router for multiple
virtual connections. Use this to enable or disable the
PVC you are currently configuring. By default, the
Pvc0 is enabled and the remaining PVCs are