Filter
Top Products
DVA-G3340S User Manual Page 66 of 94 V1.00 AU
When the WAN
connection is configured
for either PPPoA or
PPPoE, you can configure
the Router’s PPP session
to remain on all the time,
or to disconnect after
some period of no
activity. You may also
choose to instruct the
Router to connect each
time you want to access
the WAN or the Internet.
PPP Connection State
Advanced > PPP
PPP Connection settings menu
If you want the Internet or WAN connection to be available any time a host on your
LAN requests access, select the Always On option. If your ISP account is billed
according to the amount of time the Router is connected, choose the Connection
On Demand option. You can configure an idle time in minutes to disconnect the PPP
connection after a period of inactivity. This will discontinue the PPP session and
require a few seconds to reconnect when a host requests access to the WAN.
Alternatively you can choose the Manual option and use the Connect button to
initiate a PPP connection each time you want to use the Router to access the WAN. If
you use the Manual option, you must return to this menu and click the Disconnect
button to terminate the PPP session.