Filter
Top Products
DVA-G3340S User Manual Page 59 of 94 V1.00 AU
The LAN Clients menu is used
when establishing Port
Forwarding, Access Control and
Advanced Security rules for IP
addresses on the LAN. This
menu can be accessed directly
by clicking on the LAN Clients
button or hyperlink in the
Advanced setup menu. You
can also
click on the New IP
button located in the Port
Forwarding, Access Control and
Advanced Security menus to
access this menu. In order to
use these advanced features it
is necessary to have IP
addresses available for
configuration. If there are no IP
addresses listed in the LAN
Clients menu, it will not be
possible to configure Port
Forwarding, Access Control and
Advanced Security.
LAN Clients
Advanced > Lan Clients
Bridge Filter Configuration Menu
Use the LAN Clients menus to add or delete static IP addresses for the advanced
functions mentioned above, or to reserve a Dynamically assigned IP address for an
advanced function. Dynamically assigned IP addresses will only be listed if DHCP is
enabled on the Router. To add a static IP address to the list of available IP addresses,
type an IP address that falls within the range a available IP addresses and click on
the Add button. In the example above, available addresses range from 10.0.0.1 to
10.255.255.254. Any addresses added will appear in the list of Static Addresses
available for advanced configuration. These addresses can then be used in the other
Port Forwarding, Access Control and Advanced Security menus. To delete an IP
address from the list of Static Addresses, click the Delete box for the address or
addresses you want to eliminate and click on the Apply button.