Filter
Top Products
Programming Model
MVME2500 Installation and Use (6806800L01H)
114
6 Boot Sequence LGPL3/LFWP, LGPL5 11 CFG_BOOT_SEQ[1:0] =
BOOT SEQUENCE
DISABLED
7 Memory Debug
Config
DMA2_DACK0 1 Debug information from
the DDR SDRAM
controller is driven on the
MSPCID and MDVAL signs
(default)
8 DDR Debug
Config
DMA2_DDONE0 1 Debug information is not
driven on ECC pins. ECC
function in their normal
mode (default).
9 ELBCECC Enable
Config
MSRCID0 0 Default operation: eLBC
ECC checking is disabled
10 Platform Speed LA23 1 CFG_PLAT_SPEED:1=CCB
CLOCK > = 333 MHz
11 CORE 0 Speed LA24 1 CFG_CORE0_SPEED:1=C
ORE FREQ>= 1000 MHz
For 1200 MHz board
configuration
12 0 CFG_CORE0_SPEED:0=C
ORE FREQ<=1000 MHz
For 800 MHz board
configuration
13 CORE 1 Speed LA26 1 CFG_CORE1_SPEED:1=C
ORE FREQ>=1000 MHz
For 1200 MHz board
configuration
14 0 CFG_CORE1_SPEED:0=C
ORE FREQ<=1000 MHz
For 800 MHz board
configuration
15 DDR Controller
Speed
LA26 1 CFG_DDR_SPEED:1=DDR
FREQ>= 500 MHz
16 Engineering use LA[22:20]
UART_SOUT[0],
TRIG_OUT,
MSRCID[1],
MSRCID[4],
DMA1_DDONE_B[0]
111111
11
Default (for future use)
17 SerDes Ref
Clock Config
TSEC_1588_ALARM
_OUT1
1 SerDes expects a 100
MHz reference clock
frequency (default).
Table 7-1 POR Configuration Settings (continued)
CONFIG CONFIG PINS CONFIG SELECTION REMARKS