Filter
Top Products
Controls, LEDs, and Connectors
MVME2500 Installation and Use (6806800L01H)
54
3.4.2.5 COP Connector (P6)
The COP header is used for the CPU debug. The pin assignment is dictated by Freescale and is
compatible with the processor’s debugging tool.
3.4.2.6 SD Connector (J2)
Table 3-15 COP Header (P10)
Pin Signal Description
1 JTAG TDI
2 COP QACK
3 JTAG TDO
4 COP TRST
5 COP RUNSTOP (Pulled UP)
6 COP VDD SENSE
7 JTAG TCK
8 COP CHECK STOP IN
9 JTAG TMS
10 NC
11 P2020 SW RESET
12 COP PRESENT
13 COP HARD RESET
14 KEYING
15 COP CHECK STOP OUT
16 GND
Table 3-16 SD Connector (J2)
Pin Signal Description
1 DATA 3