A SERVICE OF

logo

Controls, LEDs, and Connectors
MVME2500 Installation and Use (6806800L01H)
47
3.4.2.3 PMC Connectors
The MVME2500 supports only one PMC site. It utilizes J14 to support PMC I/O that goes to the
RTM PMC. The tables below show the pinout detail of J11, J12, J13 and J14. See Figure 3-1 for
the location of the PMC connectors.
19 NC 39 +3.3V
20 GND 40 +5V
Table 3-9 Custom SATA Connector (J3) (continued)
Pin Signal Description Pin Signal Description
Table 3-10 PMC J11 Connector
Pin Signal Description Pin Signal Description
1 JTAG TCK 33 FRAME
2 -12V 34 GND
3 GND 35 GND
4 INT A 36 IRDY
5 INT B 37 DEVSEL
6 INT C 38 +5V
7 PRESENT SIGNAL 39 PCIXCAP
8 +5V 40 LOCK
9INT D 41NC
10 NC 42 NC
11 GND 43 PAR
12 NC 44 GND
13 PCI CLK 45 +3.3V
14 GND 46 AD 15
15 GND 47 AD 12
16 GNT A 48 AD 11
17 REQ A 49 AD 9