5-92 APPLICATION FUNCTIONS
MON2000
Setting Optional Base Results JULY 2010
4. From the Registers dialog, use the Variable
pull-down menu to select the Results - Opt.
Base Press option.
5. Use the corresponding component pull-
down menu to select the desired optional
base pressure option.
See Table 5-16 to determine which number
you should enter.
6. To assign a scale, ensure that the correct
row is selected and click the
button or press the F5 key. Double-click the
desired scale option to apply.
For instructions on creating or editing a
scale, see Section 5.18.4.
7. The “Results - Opt. Base Press” variable
should be listed with the settings specified.
8. Click the button to accept your
changes.
Metric GC analysis
variables are available only
if the Metric Base
Conditions option has been
enabled (see Section 5.1).