2-54 INSTALLATION AND SETUP
MON2000
The COM4A Board JULY 2010
(i) Install the ten position connector from
COM8 to J12 on the System Interface
Board.
(j) Connect the Analog cable to J6 on the
System Interface Board.
With COM4A Boards installed, Serial Port 8 is
usually assigned via MON2000 Applica-
tion>Serial Ports menu. Select Front Panel
from the Usage pull-down menu (see Figure 2-6
and Figure 2-7).
Figure 2-6 Serial Port 4 with COM4A Board
Figure 2-7 Serial Port 8 with COM4A Board