Filter
Top Products
9-28 MON2000 PLUS DATA COLLECTION/AUTO-POLLING
MON2000
Poll Command: Registers JULY 2010
8. Click the button to discard your
changes and return to the Configuration for
Data Collection window.
9.2.18 Poll Command: Registers
Blocks of Modbus Register data can be specified
for collection.
To configure the Registers Command,
1. From the General Configuration: List of
Commands, use the Commands pull-down
list and select the POLL command.
2. Press the RIGHT ARROW key on your
keyboard, or LEFT-CLICK the mouse Type
field and select Registers from the pull-
down list.
3. Press the RIGHT ARROW key on your
keyboard, or LEFT-CLICK the mouse in the
Command Description field. Enter a
description for the Registers command.
MON2000 PLUS reads all the
configured Registers
associated with the Modbus
Type (Sim_2251 or
User_Modbus) if you are
connected to a GC
Controller.
If you are using a direct
connection (rather than an
Ethernet connection), the
reading process could take a
long time.
When initially building a
“polling control” file, you
may want to use the
MON2000 PLUS “Offline
Edit” function with an “as
configured” version of the
application open to avoid
these delays.