Filter
Top Products
INSTALLATION AND SETUP 2-37
MON2000
JULY 2010 Modem Initialization Strings/Setup
By default, MON2000 provides a modem
initialization string that serves the purpose for
most Hayes-compatible modems. Therefore, in
most cases, you need not enter a different
string.
However, for some modems, you may want to
consult the following pages which document
initialization strings and modem setups that
have been field-tested.
Black Box - Modem 325
During development of the GC Controller, a
Black Box Modem 325 was used to test modem
communications with the GC unit. For that test
and that modem, the modem initialization was
set as follows:
\N0\C0\Q0 (where 0 = zero)
The default initialization string that MON2000 provides is
sent to the PC modem first. Then the custom initialization
string you provide is sent. In this manner, MON2000 sets the
modem parameters that it requires, while you can customize
the modem's operation to respond to special conditions.
Once the optimum modem initialization string has been
determined, it should need no further revision unless a
different brand or model of modem is installed.