Filter
Top Products
7-18 REPORTS
MON2000
MON2000 Printer Control JULY 2010
7.4 MON2000 PRINTER CONTROL
This function allows you to define schedules for
automatic printing of standard GC reports to a
printer connected to your PC. See Section 3.7 to
configure the printer settings. The user must
be on-line (connected to the controller) using
either a serial port direct connection, modem or
Ethernet card in order to print from the
MON2000 printer.
Hours hour interval at report should print
Use this setting for intervals less than 24 hours. For example, use this setting if you
wish to print a report every 8 hours. Ensure that the Time value is “00:00” to disable
the 24-hour setting or “12:00 AM” to disable the 12-hour setting.
This setting only applies to streams enabled (i.e., checked ON) for report printing.
Avg average type to be used in the report calculations; calculations are dependent on
settings in the Averages Calculations dialog (see Section 5.5.2)
No = disabled
Hr = hourly avg
24 = 24-hour avg
Wk = weekly avg
Mn = monthly avg
Var = variable avg
<numbe
red
column
s>
streams to be used for data collection when the report is generated
Form
Feed
enable/disable manual paper feed feature of printer
Alarm
Logging
enable/disable real-time printing of alarms as they occur
Event
Logging
enable/disable real-time printing of events as they occur
Table 7-8 Description of Settings for GC Printer Control (Continued)
Setting Description