Filter
Top Products
Troubleshooting Page 91
Color is patchy or distorted at the edges of the document.
The image is faint or out of focus.
Problem Solution
The document isn’t
placed correctly on the
document table.
If the original is very thick or warped at the edges, the edges of the
image may be discolored. Cover the edges of the original with opaque
paper to avoid interference from outside light.
If part of the original is outside the document table, the edge may be
discolored. Change the position of the original.
Problem Solution
The document isn’t
positioned correctly on
the document table.
Make sure the document is placed flat on the document table.
Some EPSON TWAIN
settings may be set
incorrectly.
Check your Tone Correction setting and/or select a darker Exposure
setting. See Advanced Scanning for instructions on changing these
settings.
Your monitor isn’t
calibrated or isn’t
adjusted correctly.
Make sure you have calibrated your monitor to your scanner as
described in Using the EPSON Screen Calibration Utility. Also check
your monitor’s brightness and contrast settings. Make sure the
Destination (output device) setting is set to Screen/Web in EPSON
TWAIN.