Filter
Top Products
11
Installing the Ink Cartridges
Make sure you've removed the shipping bracket before installing ink cartridges.
Make sure the first ink cartridges you install are the correct type for your printer: EPSON
UltraChrome" ink or EPSON Photographic Dye'" ink. The chips on the cartridges are
programmed to initialize the printer as the correct ink model. This determines the type of ink
your printer will use for its entire lifetime.
The JetPlate 7600 uses only the ink cartridges supplied by JetPlate Systems, Inc. (do not
use any other cartridges than the ones supplied by JetPlate Systems Inc. or damage may
occur to the JetPlate 7600).
Before you begin, make sure the printer is plugged into a grounded outlet.
Follow these steps to install the cartridges:
1. Press the Power button on the control
panel to turn the printer on.
2. Open the ink compartment cover.
3. Raise the ink lever to the unlocked position.
4. Locate the ink cartridges that came with the printer. If ink gets on your hands, wash
them thoroughly with soap and water. If ink gets in your eyes,
flush them immediately with water. If you can't insert the cartridge
smoothly, you may have the wrong cartridge.
5. Remove each cartridge from its packaging. If you're using
EPSON UltraChrome ink, gently shake each cartridge before
installing it.
All Trademarks used in this document are the properties of their respective owners. Rev. 1.3 4/6/2004