Filter
Top Products
18
4. Use the or button to select the number of the straightest line. Note that 5 is
always the default selection.
5. Press Enter to accept your selection and go to the next group of lines.
6. Repeat this process to examine each of the other color groups in row # 1: C, M, Lc,
Lm, and Y. In each case, select the number of the straightest line, then press Enter.
7. Repeat this process to examine the groups of lines in rows #2 and #3.
8. When done, press Pause to exit the head alignment.
Examining the BI-D BLACK Alignment Pattern
1. Depending on the width of the paper (or
plate) loaded in the printer, more than one
set of patterns may be printed. Locate the
patterns in the middle of your printout. In
the steps that follow, refer to those patterns
to make your adjustments, instead of the
ones printed toward the left or right.
2. Look at the display screen on the printer.
Notice that It is prompting you to choose the
best line in the group labeled K1 in row #1.
3. Use your own eye loupe or the one that came with the
printer to determine which line is the straightest. In this
example, the middle line (numbered 5) is the best
choice.
4. Use the
or button to select the number of the straightest line. Note that 5 is
always the default selection.
5. Press Enter to accept your selection and go to the next group of lines.
6. Repeat this process to examine the lines in rows #2 and #3. In each case, select the
number of the straightest line, then press Enter.
7. When done, press Pause to exit the head alignment.
Examining the BI-D ALL Alignment Pattern
Be sure to perform the BI-D BLACK adjustment before running this one.
IMPORTANT: Do not enter an adjustment value for K1
when prompted, or your color adjustments won't be
accurate.
1. Depending on the width of the paper loaded in the
printer, more than one set of patterns may be
printed. Locate the patterns in the middle of your
printout. In the steps that follow, refer to those
All Trademarks used in this document are the properties of their respective owners. Rev. 1.3 4/6/2004