Filter
Top Products
4
Chapter 1: Overview
This manual covers the assembly and initial adjustments of the JetPlate 7600 and JetProof
7600.
• Space requirements for Jetplate & Proofer (optional)
• UV Light restrictions
• Setup JetPlate
1. Assembling the JetPlate
2. Nozzle Check and Alignment
3. Installing PrintPlate
4. Platen and Cover Installation
5. Flushing and Charging Process
• Setup the Proofer (optional)
• Installing the JetPlate Rip 8.0.4
Space Requirements for JetPlate & Proofer
• The JetPlate requires
a sturdy table surface
at least 4' by 2.5' with
a height of 30”.
• You will need to have
enough free floor
space to the right of
the table so that you
can stand there while
positioning the input
platen.
• The Epson 7600
Proofer Printer has an
optional stand,
recommended.
• Both units should be
close enough to your
computer to connect
the JetPlate 7600
and/or Proofer with
the twelve-foot cables
that are shipped with
your JetPlate system.
All Trademarks used in this document are the properties of their respective owners. Rev. 1.3 4/6/2004