Filter
Top Products
27
Follow the steps below when the BI-D ALL patterns finish printing.
IMPORTANT: Do not enter an adjustment value for K1 when prompted, or your color
adjustments won't be accurate.
1. Depending on the width of the paper loaded in the printer, more than one set of
patterns may be printed. Locate the patterns in the middle of your printout. In the
steps that follow, refer to those patterns to make your adjustments, instead of the
ones printed toward the left or right. Look at the display screen on the printer. It
shows #1 K1. Do not change the adjustment value for K1. Press Enter and continue
with the following steps.
2. The printer is now prompting you to choose the best block in the group labeled K2 in
row #1.
3. Use your own eye loupe or the one that came with the printer to determine which
block has the least visible vertical line. In this example, the middle block (numbered
5) is the best choice. If number 5 is the best block in each group, the print head is
already properly aligned. Press Pause to exit the head alignment early.
4. Use the Paper Feed up or
down button to select the number of the best block. Note that 5 is always the default
selection.
5. Press Enter to accept your selection and go to the next group of blocks.
All Trademarks used in this document are the properties of their respective owners. Rev. 1.3 4/6/2004