Filter
Top Products
19
4-Inch Wide Roll Paper
Follow these steps to load the roll paper:
1. Make sure your printer and computer are turned on.
2. Before loading the paper, make sure the edge is cut cleanly—at a 90 degree angle
in each corner—to ensure proper loading. If necessary, trim the edge using a
straight-edge tool or triangle.
3. Remove the printer’s paper support and install the roll paper holder in the same
mounting slots. (The sides of the holder are marked R and L to indicate its right
and left sides.)
4. Insert the roll paper onto the holder’s spindle, making sure both are oriented as
shown here. Then insert the spindle into the roll paper holder.
Insert the end of the
spindle with the paper stop
on this side