Epson CPD-9992 Printer User Manual


 
7
ENERGY STAR Compliance
As an E
NERGY
S
TAR
Partner, EPSON has
determined that this product meets the
E
NERGY
S
TAR
guidelines for energy
efficiency. The EPA E
NERGY
S
TAR
office equipment program is a voluntary
partnership with the computer and office
equipment industry to promote the introduction of energy-efficient
personal computers, monitors, printers, fax machines, and copiers in an
effort to reduce air pollution caused by power generation.
Important Safety Instructions
Before using your printer, read the following safety instructions to make
sure you use the printer safely and effectively:
Be sure to follow all warnings and instructions marked on the printer.
Turn off and unplug the printer before cleaning. Clean with a damp
cloth only. Do not spill liquid on the printer.
Do not place the printer on an unstable surface or near a radiator or
heating vent or in direct sunlight.
Do not block or cover the openings in the printer’s case or insert
objects through the slots.
Use only the type of power source indicated on the printer’s label.
Connect all equipment to properly grounded power outlets. Avoid
using outlets on the same circuit as photocopiers or air control
systems that regularly switch on and off.
Place the printer near a wall outlet where the plug can be easily
unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être
débranchée facilement.
Do not let the power cord become damaged or frayed.
Always turn the printer off
using the Ppower button.
Never use an external
switch, such as a power
strip switch. Don’t unplug
the printer until the
Ppower light is off.
Pbasics.book Page 7 Friday, March 10, 2000 2:49 PM