Filter
Top Products
39
P is on The
Ppower light is on when the printer is on and ready to print. It flashes
when the printer is receiving a print job, charging ink, or cleaning the print head.
S
flashes When the
S paper out light flashes, you have a paper jam. Press the
E load/eject button to try to clear the jam. If that doesn’t work, turn off the
printer and gently pull out all the paper. Make sure none of the sheets are
curled, creased, old, stuck together, or too thin. Then reload the paper against
the right edge guide and slide the left edge guide against it. Turn on the printer
and resume printing.
S
is on When the
S paper out light comes on, your paper is out or incorrectly loaded.
Make sure none of the sheets are curled, creased, old, stuck together, or too
thin. Then reload the paper against the right edge guide and slide the left edge
guide against it. Press the
E load/eject button to resume printing.
B
or
A
flash When an ink out light flashes, your ink supply is low. Make sure you have a
replacement cartridge (black S020187, color S020191).
B
or
A
are on When an ink out light comes on, you need to replace the ink cartridge. Make
sure you have a replacement cartridge (black S020187, color S020191). See
page 30 for replacement instructions.
P and
S
flash
and
B
and
A
are on
When the
Ppower and
S paper out lights flash, and one or both of the ink out
lights come on, jammed paper may be blocking movement of the print head or
you may not have removed the yellow tape seal from the installed ink
cartridge(s). Turn off the printer, open the cover, and check inside for any
jammed paper. Then turn the printer back on. If an ink out light remains on and
the print head moves into replacement position, replace the ink cartridge(s) as
described on page 33. If the lights still flash and/or come on, contact your
dealer or EPSON; see page 47 for contact information.
P
S
B
A
flash When all the lights flash, your printer may have an internal error. Make sure you
removed all the packing material as described on the unpacking sheet in your
printer box. Then turn off the printer, wait a few seconds, and turn it on again. If
the lights still flash, contact your dealer or EPSON; see page 47 for contact
information.
P
S
B
A
are off When all the lights are off, the printer is not receiving power. Try these
solutions:
■ Make sure the printer is turned on.
■ Turn off the printer, plug in the power cord securely, and turn on the printer
again.
■ Make sure the outlet is operable and is not controlled by a switch or timer. If
in doubt, try using another outlet.
Pbasics.book Page 39 Friday, March 10, 2000 2:49 PM