Epson CPD-9992 Printer User Manual


 
45
Too many copies are printing.
Make sure the
Copies
settings in the printer
software and your application aren’t both set
for multiple copies.
Paper doesn’t feed.
Remove the stack of paper from the sheet
feeder. Check that the paper:
Isn’t curled or creased
Isn’t too old
Isn’t loaded above the arrow on the left
edge guide
Isn’t jammed inside the printer. (If the
S paper out light is flashing, paper is
jammed.)
When you reload the paper, make sure the left
edge guide fits the paper, but not too tightly.
Paper jams inside the printer.
Turn off your printer, open the cover, and
remove all the paper that’s inside, including
any small pieces that may have torn off.
If your paper jams frequently:
Use smooth, high-quality paper, loaded
printable side up.
Fan the stack and then even the edges
before loading it.
Don’t load paper above the arrow mark on
the left edge guide.
Place the paper against the right edge
guide and slide the left edge guide against
your paper.
Multiple pages feed at once.
Remove the paper from the printer, then:
Make sure the paper isn’t too thin.
Fan the edges of the stack of paper to
separate the sheets.
Reload the paper as described on page 11.
Make sure the edge guides fit against the
paper, but not too tightly.
Solving Miscellaneous
Printout Problems
The margins are incorrect.
Make sure the paper settings in your
printer software are correct for your paper
size. See the electronic Reference Guide for
instructions.
Check your software documentation for
instructions on selecting the correct
margins for your paper size. The margins
must be within the printable area of the
page. See “Specifications” in your
electronic Reference Guide for more
information.
The image size or position is incorrect.
Make sure the paper and/or layout options are
set correctly.
The image is inverted, as if viewed in a
mirror.
Turn of f
Flip Horizontal in the printer
software or the mirror setting in your
application software. (If you’re printing on
EPSON Iron-On Cool Peel Transfer Paper, the
image should be inverted so it looks correct
when it’s ironed on.)
Pbasics.book Page 45 Friday, March 10, 2000 2:49 PM