Filter
Top Products
4. Troubleshooting (DeviceNet)
4.1.3.2 Loose Connector and Signal Wire
Check for the connections of the following parts on the connector and cable.
(1) Crimp Terminal
Crimping Terminal
(2) Connection of connector and signal wire
Small flat-blade screwdriver with even thickness
(3) Connection of connector and unit (T-branch tap)
Cable side
Screw
Connector on the node
(mask) side
Connector on the
T-branch side
Screw
Connector on
the cable side
Cable with M12
micro-size shielded
connector (at one
end or both ends)
Thin cable
Thin cable
Cable with M12
micro-size shielded
connector (at one
end or both ends)
Female
Male
Female
Male
Male Female
Mounting
hole
100 Fieldbus I/O Rev.6