Filter
Top Products
2. Installation
(9) Select File | Download in Flash to register the configuration in the fieldbus board.
After a few seconds, the board's state will show green in the status bar.
(10) Close the applicomIO console application.
(11) The default slave EDS file is created.
The path is: C:\Program Files\Woodhead\Direct-link\ApplicomIO2.3\ConfigIO
\Config01\applicomio.eds.
You may make a copy of the default slave EDS file and modify it to create your
original EDS file if necessary.
Edit the copy of the slave EDS file using Notepad. You may want to change the
VendName and ProductTypeStr.
Fieldbus I/O Rev.6 39