Filter
Top Products
2. Installation
2.8.2 Specifications
Part Number applicom PCI-DPIO / PCU-DPIO
Modes Master/Slave
Baud Rates 9.6, 19.2, 93.75, 187.5, 500, 1500, 3000, 6000, 12000 kbps
Interface 1 PROFIBUS port (EN 50 170)
Output Current Capacity Maximum 150mA
Supported Devices All DP Devices
Maximum Stations 126 (32 per segment)
GDS Support Yes
PROFIBUS DP Class 1 Yes
PROFIBUS DP Class 2 Yes
Input Data Size 1 to 244 bytes
Output Data Size 1 to 244 bytes
Automatic Detection Yes. Devices can be detected automatically.
2.8.3 Software Installation
Before installing any boards in your controller, you must install the applicomIO console
application and drivers for the type of board you will be using.
(1) Start the controller.
(2) Run the C:\Install\FieldBus\Install\applicomIO\Disk1\Setup.EXE from the install
folder in the controller to start the installation.
(3) Select the desired language for the installer.
(4) Select Install Products.
(5) Select applicomIO. Do not select applicomIO ActiveX.
42 Fieldbus I/O Rev.6