Filter
Top Products
2. Installation
(10) Click the OK button. The following dialog will appear.
Configure the IP address for the EtherNet/IP board.
Select the IP address from Static, DHCP, or BOOTP at Configuration.
Do not select Flash Memory.
When you select Static, set the values for each item.
(11) After all the boards are added, the system should be restarted.
Close the applicomIO Console application and click the OK button on the Save
modification dialog. Click the OK button on the following dialog to restart
Windows.
(12) After restarting the system, continue with the following 2.9.5 Master Mode or 2.9.6
Slave Mode sections.
Fieldbus I/O Rev.6 59