Filter
Top Products
10
Setting up
•Be sure to read the separate
Safety
Instructions/World-Wide Warranty
Terms
booklet before installing the
projector.
• Do not stand this projector upright.
This may damage your projector.
c Caution:
The size of the projected image is basically determined by the distance from the projector's lens
to the screen.
90
Centre of
lens
Screen
Projection distance
The height from the centre of the lens to the
bottom of the screen will vary depending on the
lens shift setting.
While referring to the table below, position the projector so that the images are projected onto the screen
at the optimum size.
The values should be used as a guide for setting up the projector.
16:9 sceen size
Projection distance
Shortest (Zoom
adjustment: Wide)
Longest (Zoom
adjustment: Tele)
30" 66×37 (26×15) 73-111 (2.4-3.7)
40" 89×50 (35×20) 99-149 (3.2-4.9)
60" 130×75 (51×28) 149-225 (4.9-7.4)
80" 180×100 (71×39) 200-301 (6.6-9.9)
100" 220×120 (87×47) 251-377 (8.2-12.4)
120" 270×150 (106×59) 301-453 (9.9-14.9)
150" 330×190 (130×75) 377-567 (12.4-18.6)
200" 440×250 (173×98) 504-757 (16.5-24.8)
300" 660×370 (260×146) 757-1137 (24.8-37.3)
Units: cm (in) Units: cm (ft.)
4:3 sceen size
Projection distance
Shortest (Zoom
adjustment: Wide)
Longest (Zoom
adjustment: Tele)
30" 61×46 (24×18) 90-136 (2.9-4.5)
40" 81×61 (32×24) 121-183 (4.0-6.0)
60" 120×90 (47×35) 183-276 (6.0-9.0)
80" 160×120 (63×47) 245-369 (8.0-12.1)
100" 200×150 (79×59) 307-462 (10.1-15.2)
120" 240×180 (94×71) 369-555 (12.1-18.2)
150" 300×230 (118×91) 462-694 (15.1-22.8)
200" 410×300 (161×118) 617-927 (20.2-30.4)
300" 610×460 (240×181) 927-1392 (30.4-45.7)
Units: cm (in) Units: cm (ft.)
Lens shift adjustment
The lens shift dials can be used to position the image and is especially useful when using the projector
in the following locations s page 16.
•Hanging from the ceiling
•A screen in a high location
•Projector situated to the side so that the screen can be viewed sitting right in front of it
•Projector situated on a shelf, etc.
When positioning an image using the lens shift dial, hardly any deterioration of the image occurs
because the lens shift correction is adjusted optically.
Adjusting the projection size