Filter
Top Products
13
Installing the
Projector
Preparing the Remote Control
Inserting batteries into the remote control
The remote control is not supplied with batteries already inserted. Insert the accessory batteries before using
the remote control.
Battery replacement period
If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for
some time, it probably means that the batteries are becoming flat. If this happens, replace the batteries with
two new batteries. Use two new AA batteries as replacement batteries.
Using the remote control
Operating range (horizontal)
Operating range (vertical)
1 Open the battery cover.
2 Insert the batteries.
3 Close the battery cover.
While pressing
the knob, lift up.
Press the battery compartment
cover until it clicks into place.
Check the (+) and (-)
indications inside the
battery compartment and
insert the batteries so that
they face correctly.
c Caution:
Remote control light-receiving area
Approx. 30°Approx. 30°
Remote control
light-emitting area
Operating
distance
Approx.6m
Approx. 30°Approx. 30°
Operating distance
Approx. 6m
Approx. 15°
Approx. 15°
Approx. 15°
Approx. 15°
Operating distance
Approx. 6m