Filter
Top Products
14
Turning the Power on and Projecting Images
Turning the power on
Turning the power on
1 Remove a lens cover.
2 Use the accessory power cable to
connect the projector to an electri-
cal outlet.
3 Turn the power on for the signal
source (for a video source, press
the [Play] button to start
playback).
4 Turn the power on for the projector.
The "beep" start-up tone will sound.
After a short period, the lamp will turn on
and projection will start.
•The projector is equipped with a "Child
Lock" function that prevents young
children from accidentally turning the
power on and looking into the lens.
spage 29
•When using above an altitude of about
1500 m, set the "High Altitude Mode"
to "ON".spage 29
Beep
Control Panel
Remote Control
* For video equipment, press
"play" to start playback.
•This projector is equipped with an automatic adjustment function
that automatically optimizes it when the RGB video source or a
computer input signal is switched.
•If a laptop computer or a computer with a LCD screen has been
connected to the projector, you may need to use keyboard or
function settings to change the output destination. While holding
down the key, press (the key with a symbol such as
/ on it). After the selection is made, projection will soon
start.
Computer documentation
Example of output selection
NEC
Panasonic
SOTEC
HP
Toshiba
IBM
SONY
DELL
Fujitsu
Macintosh
Set mirror setting or
display detection.
ON
1
2
3
4
QTIP:
QTIP: