Filter
Top Products
17
Adjusting the Projection Screen and the Audio Volume
Basic
Operations
Adjusting the volume
Correcting keystone distortion
(Keystone)
Correcting keystone distortion (Keystone)
When you wish to adjust the projection above or below the range of lens shift adjustment
set the projector at an angle.
When the projector is angled, the projected image may distort into a trapezoid. In such
cases, press ( ) ( ) on the control panel, or on the remote control
to adjust the images.
However, the image quality will decrease compared to if the lens shift function is used.
When the lens is shifted to the left or right, complete keystone correction is not possible.
When making keystone corrections set the lens at the centre left to right.
30°
30°
Keystone distortion can be corrected within a maximum vertical angle of approximately 30°.
Adjusting the volume
The volume of the projector's built-in speaker can be adjusted as follows.
Remote control operation
Control panel operation
You can also make adjustments from the configuration menu. spage 30
•You can also make adjustments from the configuration menu. spage 28
•To reset the correction value, press and hold down with pressed down
for at least 1 second on the control panel.
When the button is pressed to the side, the volume increases, and when it is pressed to
the side, the volume decreases.
QTip:
QTip: