Filter
Top Products
27
Configuration Menu Functions
Configuration
Menu
"Setting" menu
This can be used to save the current configuration menu settings. s page 22
This retrieves settings stored in the memory.
spage 22
This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts images
to their optimum condition when the input signal is changed. The three automatically adjusted items are
"Tracking
g", "Position" and "Sync.g"
This returns all settings in the "Image" menu to their default settings, except for the settings that have been
saved using the "Save Memory" command. The "Save Memory" settings can be reset using the "Memory
Reset" menu. page 31
Use , , or to move the display position for images.
(This can only be set when composite video or S-Video signals are being input or when 525i/625i signals from
component video
g or RGB video are being input.)
• OFF :Conversion of interlacedg (i) signals to progressive (p) signals is carried out for each field in the
screen.
This is ideal for using when viewing images with a large amount of movement.
• ON :Interlaced (i) signals are converted into progressive (p) signals. This is ideal for using when
viewing still images.
Selects the aspect mode. s page 18
*1 The setting values are stored separately for each image source and signal type.
Only displayed for RGB-video/Computer
Save Memory
Load Memory *
1
Auto Setup *
1
Reset
Screen
Position *
1
Progressiveg *
1
Aspectg *
1