Filter
Top Products
5
Maintenance and Transportation
5-9
R4C3810 Reference Guide
Rev. C
A5 size MAIN.FM
9/30/99 Pass 0
R
Proof Sign-off:
ABE K.Tsuno M.Takata_______
M.Takata _______
ABE J.Holmes _______
7. Reinstall the developer cartridge.
8. Press down the printer cover until it clicks shut.
9. When turning on the printer, access the printer settings dialog
box in the printer driver, and click the
OPC Level Clear
button. The OPC level clear dialog box is displayed.
10. Click
OK
to reset the Photoconductor level counter.
Cleaning the Printer
The printer needs only minimal cleaning. If you notice a decline
in print quality, clean the inside of the printer as described in this
section.
You should also clean the paper cassette and the printer cover
every few months. These procedures are described later in this
section.
Cleaning the inside of the printer
Fine particles of dust can collect inside the printer. Follow the
steps below to clean the inside of the printer and the paper feeder:
1. Make sure the printer is turned off.
2. Open the printer cover.
w
Warning:
Opening the printer exposes the fuser, which is marked
CAUTION Hot Surface Avoid Contact.
3. Remove the developer cartridge and the photoconductor unit
as each are described in “Replacing Consumable Products”
on page 5-2.