Filter
Top Products
A-12
Technical Specifications
R4C3810 Reference Guide
Rev. C
A5 size APTEC.FM
9/30/99 Pass 0
L
Proof Sign-off:
ABE K.Tsuno M.Takata_______
M.Takata _______
ABE J.Holmes _______
+5V
Pull up to +5V with 1 kΩ
Using the ECP mode
To use the ECP mode with a parallel (IEEE 1284-B compliant)
connector, your computer must support the ECP mode.
Note:
The ECP mode is available with Windows 98/95 and Windows NT4.0.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program that
comes with your computer. (For details of the settings and the
program, see your computer manual.)
2. Click the
Start
button, point to
Settings
, and then click
Control Panel
.
3. Right-click the
System
icon, and click
Open
in the menu that
appears.
4. Select the
Device Manager
tab.
5. Select the
ECP Printer Port
under Ports [COM & LPT], then
click the
Properties
button.
6. Select the
Resources
tab.
7. Make the appropriate setting in the Resource settings dialog
box. (This setting depends on your computer system. For
details, see your computer manual.)
8. Click
OK
to save the settings.