Epson 800P Projector User Manual


 
Welcome
7
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.)
To receive a component video signal from a VCR or other video
device, you need a VGA-to-component video cable. You can
purchase this from EPSON; see page 8.
To connect two computers to the projector at the same time, you
need a DVI/analog interface cable. You can purchase this from
EPSON; see page 8.
Some older PowerBooks and Macintosh desktop models may
need the Macintosh adapter set shown on page 89 (available from
EPSON; see page 8). Older iMac systems may need a special
adapter to provide a VGA output port; see your computer dealer.
Some systems may need an additional cable to use the remote
control as a wireless mouse. If your Macintosh doesnt have a USB
port, youll need a Macintosh mouse cable. If your PC doesnt
have a USB or PS/2 port, youll need a PC serial mouse cable. See
your projector dealer to obtain the correct cable.
To take advantage of the projectors Digital Visual Interface, you
need a DVI cable, and your computer must be capable of
producing video signals in DVI format (for details, see page 93).
You can purchase this cable from EPSON; see page 8.
To recieve an audio signal, you may need a stereo mini-jack cable,
available from most electronics dealers.