Filter
Top Products
92
Appendix A: Connecting to Additional Equipment
Connecting to a Second Computer
To connect a second computer to the projector, you need to use the
projector’s
Computer1
port. You’ll need an optional DVI-analog
cable, unless the computer supports DVI (Digital Visual Interface)
video.
1. Connect one end of the cable to the computer’s video port.
2. Connect the other end to the projector’s
Computer1
port as
shown.
3. To display images properly, make sure the
Comp1 Input
option
in the projector’s Setting menu is set correctly. See page 54 for
instructions.
4. If you want to hear the computer’s audio through the projector,
you’ll need to connect the USB cable or purchase an RCA-to-
3.5 mm stereo cable (available from your electronics store or video
dealer).
Insert the cable’s 3.5-mm plug into your computer’s audio-out
port. Then attach the connectors at the other end of the cable to
the projector’s
Audio 2
jacks, matching the white plug to the
L
jack and the red plug to the
R
jack.
Computer 1 port