Filter
Top Products
Fine-tuning the Projector
55
Setting Advanced Features
You can use the Advanced menu to configure the projector for rear
projection or ceiling mounting, and adjust several other features.
1. Press the
Menu
button.
2. Use the
Sync–
button (control panel) or the button
(remote control) to highlight
Advanced
. You see the features and
their settings on the right side:
3. Press
to select the Advanced menu.
4. Use the
Tracking
and
Sync
buttons (control panel) or
the button (remote control) to set the following options:
■
Language
Select from 9 languages to be used for the projector menus.
■
Startup Screen
Turn on to display your captured image or logo whenever the
projector starts. (See page 51 for more information.)
■
Color Adjustment
Adjusts the color temperature of the projected image. Select
Color Temp.
to set a temperature between 5000 and
10000 K. Select
RGB
to adjust individual red, green, and
blue values, as shown. (Not available if
sRGB
is selected as
the Color Mode setting in the Video menu. See page 47 for
more information.)
■
Rear Proj.
Turn on to project from behind onto a transparent screen.