Filter
Top Products
16
Setting Up the Projector
Connecting the RCA A/V Cable
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect the yellow plug on one end of the A/V cable to the
projector’s yellow
Video
jack.
2. Connect the other yellow plug to the video-out jack on your video
source.
3. Connect the red and white plugs on the A/V cable to the
projector’s
Audio L
(white) and
R
(red) jacks.
4. Connect the red and white plugs on the other end of the cable to
the corresponding audio output jacks on your video source.
If your video source has a stereo mini-jack instead of RCA jacks,
you can use a stereo mini-jack cable (not included). Connect it to
the
Audio 1
jack on the projector.
A/V cable
A/V cable
stereo mini-jack cable