Filter
Top Products
Displaying and Adjusting the Image 19
3. If the Power light is orange, press the red PPower button on
top of the projector—or press the P
Power button on the remote
control to turn on the projector. The projector beeps once and the
Power light flashes green as it warms up.
(If this is your first time using the remote control, make sure the
batteries are installed and the
ON/OFF switch on the side of the
remote is turned on.)
The projector adjusts the focus and then displays your image. The
Power light stops flashing and remains green.
4. If you’ve connected a Windows-based computer to the projector,
you may see a New Hardware Wizard screen saying your
computer has found a plug-and-play monitor; if so, click
Cancel.
5. If you are prompted to enter a password, see page 68.
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
Power button
Turn on
remote
Power button
note
To conserve electricity and
make the lamp last longer,
you can enable the Sleep
Mode function. This feature
turns off the lamp and
reduces power consumption
whenever the projector has
not received any signals for
30 minutes. See page 75 for
more information.