Filter
Top Products
54 Connecting to Computers and Other Equipment
Connecting a Component Video Source
1. Locate a component-to-VGA video cable.
2. Connect the cable to your player and one of the
Computer/Component connectors on the projector.
3. If you want to play sound through the projector, see page 56 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see page 18 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
Search button on the remote control or the Source Search
button on the projector’s control panel repeatedly until the image
appears.
note
Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player’s documentation.