Filter
Top Products
20 Displaying and Adjusting the Image
Selecting the Image Source
Selecting the image source lets you switch between images input from
different pieces of connected equipment (such as a computer or DVD
player).
If you don’t see the image you want, press the
Source Search button
on the remote control or the projector repeatedly until you see the
image you want to project on the screen.
You can also select your image using the
Source buttons either on the
projector or the remote control as follows:
■ The projector has two Source buttons. Use the
Computer/Component button to switch between equipment
connected to the
Computer/Component ports.
Use the
Video/S-Video button to switch between equipment
connected to the
Video and S-Video ports.
■ The remote control has four Source buttons. Use them to switch
between devices connected to the ports identified on each button.
(The PowerLite 830p does not support EasyMP.
TM
)
You can preview all sources on one screen to help you select the
desired source (see page 35).
note
To focus and adjust the
image, see page 24. If a
projected image fails to
appear, see page 21 for help.