Filter
Top Products
Maintaining the Projector 99
11. Once the lamp is fully inserted, tighten its screws and replace the
cover, then tighten the cover screw. (The projector won’t come on
if the lamp cover is loose.)
12. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menus.
1. Press the
Menu button on the remote control or the projector’s
control panel. You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
Reset, then press Enter.
You see this screen:
3. Select
Lamp-Hours Reset and press Enter. You see this prompt:
4. Select
Yes and press Enter.
5. Press
Esc or Menu to exit.