Filter
Top Products
79
1
Managing Projectors
The EasyManagement software for your projector lets you monitor
and control your projectors from a remote computer:
■ Use EMP Monitor (available for Windows only) to see your
projectors’ status, switch image sources, and control basic settings.
■ Use EMP NetworkManager to send messages by e-mail, notifying
you when a problem occurs with a projector.
■ Use a network management utility running SNMP, such as
HP OpenView, to manage your facility’s equipment from a
pre-existing system.
To use the EasyManagement software to manage your projectors, first
install EMP Monitor as described on page 114. Then connect and
configure each projector you want to monitor. You can connect the
projector over a wired network (as described on page 80).
This chapter covers the following information:
■ Connecting the projector to and configuring it for a wired
network
■ Monitoring and controlling your projector with EMP Monitor
■ Using a browser to monitor the projector
note
If you’re using a network
management utility running
SNMP, you can configure
your network to send trap
alerts even without a plug-in
(see page 80). This feature is
intended for use by network
administrators only.