Mass Storage
The setup program assumes that your computer has an internal
1.44MB 3 1/2-inch floppy disk drive, an internal 20MB hard disk,
and that you are not using an external 5 1/4-inch diskette drive. If
this is true, you do not need to make any changes to the Mass
storage
portion of the setup program.
To change the mass storage information recorded by the setup
program or to confirm that the current settings are correct,
highlight
Mass storage
and press Enter. The following display
appears:
ExitExit
MemoryMemory
DisplayDisplay
CoprocessorCoprocessor
++
Mass storageMass storage
Backlight period
Gray scale
B
-A
-
-
1
1
II
Drive
B(external):
None
Drive
C
:
Type
2(20MB)
******
S
AVE
S
ETTIN
GS *******
If you are using an external 5 1/4-inch diskette drive, highlight
Drive
B
(external).
Then press Enter to select the type of
external diskette drive you have installed. As you continue to press
Enter, the display cycles through the available options: 360 KB,
1.2 MB, and None. Select the appropriate option for your system.
Your hard disk is most likely a Type 2,20MB disk. If it is not,
highlight Drive c and press Enter. Then press Enter to select the
type of drive you have installed. As you continue to press Enter,
the display cycles through the available options: Type 3 (40MB),
Type 4
(40MB) , None, and Type 2 (20MB).
Select
the
appropriate option for your system.
Running
the
Setup Program
2-7
