Filter
Top Products
6.
At the
A>
prompt, type
FDISK
and press Enter. The screen
displays the FDISK Options menu.
7.
Press 1
to select
the
Create DOS Partition
option and
press Enter. The screen displays the following menu:
Create DOS Partition
Current Fixed Disk Drive: 1
1. Create Primary DOS partition
2. Create Extended DOS partition
Enter choice: [1]
Press ESC to return to FDISK Options
8. Press 1, then press Enter. The screen displays the following:
Create Primary DOS Partition
Current Fixed Disk Drive: 1
Do you wish to use the maximum size
for a DOS partition and make the DOS
partition active (Y/N)......? [Y]
Press ESC to return to FDISK Options
9. Press Y, then press Enter. The screen displays the following
message:
System will now restart
Insert DOS diskette in drive A:
Press any key when ready . . .
10. Without removing the Startup/Operating 1 diskette, press any
key
to
restart the system.
11. Press Enter twice to accept the date and time shown.
The system now recognizes the MS-DOS partition and the A>
prompt reappears.
3-4
Preparing the Hard Disk for Use